Composites Commodity Manager

Saronic Technologies is at the forefront of transforming maritime autonomy, committed to crafting innovative solutions that elevate maritime operations through cutting-edge autonomous and intelligent platforms.Job OverviewWe are on the lookout for a skilled Composite Design Engineer to spearhead the structural design, analysis, and integration of composite m…

Saronic Technologies is at the forefront of transforming maritime operations, focusing on the development of cutting-edge autonomous solutions that enhance efficiency and safety at sea.Job OverviewWe are in search of a talented Manufacturing Engineer specializing in composites to drive the design, development, and enhancement of manufacturing processes for autonomous surface vessels. The ideal candidate will possess substantial hands-on experience in composites manufacturing, coupled with a strong dedication to fostering continuous improvement within a dynamic marine environment.Key ResponsibilitiesDesign, implement, and optimize manufacturing processes for composite materials (fiberglass).Assist production teams in addressing process challenges, enhancing product quality, and minimizing waste.Work closely with design and engineering teams to ensure the manufacturability of composite components and assemblies.Generate and maintain comprehensive process documentation, work instructions, and quality assurance standards.Apply lean manufacturing principles and process improvement strategies to boost operational efficiency.Support the design, maintenance, and optimization of tooling for composite production.Ensure adherence to safety and environmental regulations related to composite handling and processing.Deliver training and technical support to production personnel on best practices in composite manufacturing.

Saronic Technologies stands at the forefront of transforming maritime autonomy, committed to creating cutting-edge solutions that optimize sea operations through intelligent and autonomous platforms.Job OverviewAs a Supplier Quality Engineer specializing in Composites, you will play a pivotal role in ensuring that composite hulls, structures, and components supplied to Saronic meet the rigorous standards for quality, performance, and durability. This position emphasizes expertise in both open-mold and closed-mold composite manufacturing processes, such as hand layup, spray-up, and vacuum infusion, specifically tailored for marine applications. You will be instrumental in enhancing supplier quality performance, executing audits and inspections, addressing nonconformities, and deploying data-driven improvements throughout the supply chain. Your collaboration with internal teams—including design, engineering, quality assurance, manufacturing, and supply chain—is essential to uphold the highest standards of craftsmanship and material integrity for mission-critical maritime systems.Key ResponsibilitiesRoot Cause Analysis and Corrective ActionsConduct investigations into supplier nonconformities such as voids, delamination, resin anomalies, cosmetic imperfections, or dimensional discrepancies. Lead structured problem-solving initiatives using methodologies like 8D, 5 Whys, Fishbone Diagrams, and FMEA. Verify the effectiveness of corrective actions through follow-up inspections and process audits.Technical Quality ControlOversee and validate supplier processes for composite part fabrication, which includes:Mold preparation, release application, and surface integrity checksGelcoat and laminate layup consistency (monitoring resin-to-fiber ratios and controlling air entrapment)Curing, demolding, trimming, and finishing processesBonding and secondary assembly operationsDimensional and visual inspections (including surface finish, thickness, and weight verification). Implement and track key process metrics using statistical process control (SPC) or capability studies, ensuring supplier compliance with Saronic's workmanship and composite quality standards.Supplier Quality Assurance (Audits & Assessments)Plan and execute supplier quality audits and process assessments for composite manufacturing operations. Assess compliance with relevant quality management standards and regulations.

Saronic Technologies stands at the forefront of innovation, transforming maritime autonomy through advanced, intelligent platforms designed to enhance operational efficiency and safety at sea.Job OverviewWe are in search of a talented M&P Engineer - Composites to spearhead the testing and allowable development of composite materials for our cutting-edge maritime platforms. In this pivotal role, you will design lightweight, high-performance composite structures tailored for maritime conditions while meeting critical Department of Defense (DoD) performance and survivability standards.ResponsibilitiesLead and support composite material allowables development programs in accordance with CMH-17, FAA, ABS, and other applicable standards.Define, execute, and analyze test programs to generate A- and B-basis allowables.Develop and implement specifications for composite fabrics, adhesives, core materials, and related processes.Provide technical support for composite fabrication, inspection, and process control.Collaborate with test labs and suppliers to ensure adherence to aerospace quality standards.Create comprehensive test plans and roadmaps for characterizing new material systems and processes.Draft material and process specifications that align with industry standards and internal requirements.Maintain and document material property databases, ensuring compliance with regulatory standards.Assist with root cause analysis and corrective actions for material and process non-conformances.Engage in continuous improvement initiatives to inform design-for-cost and design-for-manufacturing strategies.Work with certification teams to provide technical justification and documentation for material allowables in structural substantiation.QualificationsBachelor’s degree or higher in Materials Science, Mechanical Engineering, Aerospace Engineering, or a related field.Minimum of 2 years of experience with aerospace or marine composite materials and processes, preferably in allowables development.Familiarity with CMH-17, MIL-HDBK-17, and ABS certification requirements, along with other relevant aerospace/marine composite standards.Demonstrated ability to analyze and interpret material test data and results.Excellent communication skills and the ability to work collaboratively across departments.

Saronic Technologies stands at the forefront of maritime innovation, committed to transforming autonomy at sea through cutting-edge solutions that enhance operational efficiency and effectiveness.Job Overview:We are on the lookout for a talented Composite Supervisor to lead the fabrication and assembly of composite components for our Autonomous Surface Vessels (ASVs). This pivotal role within our dynamic engineering and production team entails overseeing all composite manufacturing processes, ensuring material quality, and optimizing production workflows. You will collaborate closely with cross-disciplinary teams, including design, engineering, and production, to seamlessly integrate composite materials into our vessel systems.Key Responsibilities:Supervise Composite Manufacturing: Direct and manage a team of composite fabricators and technicians to deliver high-quality composite parts for ASVs.Material Selection & Handling: Partner with engineering and materials teams to identify and source the appropriate composite materials (fiberglass, core materials, resins, gelcoats, etc.) for various vessel components.Production Planning & Scheduling: Create and uphold production schedules to ensure on-time delivery of composite parts while managing resource limitations.Quality Control: Oversee the inspection, testing, and certification of composite components, ensuring compliance with engineering specifications, industry standards (e.g., MIL-STD), and DoD requirements.Process Optimization: Discover opportunities to enhance composite manufacturing processes, reduce waste, and boost efficiency while upholding the highest quality standards.Training & Mentoring: Educate, coach, and develop junior composite technicians and fabricators, ensuring the team possesses the necessary skills, tools, and knowledge to excel.Collaboration with Engineering & R&D: Work closely with the engineering team to comprehend design requirements and provide input on the manufacturability of composite components. Collaborate with the R&D team to explore new materials and techniques aimed at enhancing performance and lowering costs.Safety & Compliance: Uphold all safety protocols and best practices to ensure a safe working environment.

We are looking for a skilled Technical Writer specializing in composites to join our dynamic team at Saronic. The ideal candidate will possess a deep understanding of composite materials and a knack for translating complex technical information into clear, concise documentation. You will play an essential role in developing manuals, specifications, and instructional guides that enhance our product offerings.

Join saronic as a Composites Commodity Manager, where you will play a pivotal role in driving our procurement strategies and enhancing our supply chain efficiency. In this role, you will be responsible for managing the sourcing and procurement of composite materials, ensuring quality, cost-effectiveness, and timely delivery to support our innovative projects.

Saronic Technologies is at the forefront of transforming maritime autonomy, committed to crafting cutting-edge solutions that bolster maritime operations through autonomous and intelligent platforms.Job Overview:We are looking for a talented Technical Writer to produce clear, concise, and thorough documentation for our end-users. Your role will be instrumental in helping users comprehend our autonomous surface vessels and their operation. Daily responsibilities will include simplifying complex technical concepts into user-friendly content, collaborating with engineers and key stakeholders, exercising curiosity and initiative, and managing projects effectively. A strong portfolio showcasing your exceptional writing skills and meticulous attention to detail is essential. Familiarity with DoD standards and regulations related to technical documentation is a valued asset.Key Responsibilities:Engage with engineers, designers, and various stakeholders to collect information, ensuring a comprehensive understanding of technical specifications and requirements.Create and maintain a variety of technical documentation, including standard operating procedures, work instructions, and internal guides for our autonomous surface vessels.Transform intricate technical concepts into documentation that is straightforward and accessible for end-users.Guarantee that all documentation complies with industry standards and best practices, as well as pertinent DoD regulations and guidelines.Perform thorough reviews and edits of documentation for accuracy, consistency, and clarity, ensuring it meets the needs of our target audience.Collaborate closely with the production team to remain informed about project timelines, milestones, and deliverables.Continuously refine and enhance existing documentation based on feedback from users, stakeholders, and internal teams.Stay updated on emerging technologies, industry trends, and best practices in technical writing and documentation.

Join Saronic Technologies, a pioneering force in maritime autonomy, committed to designing advanced solutions that elevate maritime operations through intelligent and autonomous platforms.Position Overview:As a Composite Finishing Technician, you will play a crucial role in the meticulous final preparation and detailing of composite components. Your responsibilities will encompass scarf repairs, sanding, fairing, and preparing surfaces for painting or bonding. Collaborating closely with fellow technicians and engineers, you will ensure that each component adheres to rigorous cosmetic and dimensional standards. Your expertise will directly impact the structural integrity and aesthetic quality of our vessels.Key Responsibilities:Execute finishing operations on composite components, involving wet layup, filling, sanding, gelcoat spraying, and surface refinement.Precisely mix and apply surface fillers and gelcoat according to established protocols.Sculpt and smooth intricate contours while adhering to tolerance and quality standards.Detect and rectify surface imperfections such as pinholes, delamination, and voids using tap testing methods.Prepare components for painting, bonding, or assembly through appropriate surface treatments.Adhere to detailed work instructions, schematics, and engineering specifications.Maintain a clean and organized workspace; implement effective dust control measures.Work in partnership with the quality assurance team to ensure finished products meet visual and dimensional standards.Utilize a tablet to track procedures and time effectively.Demonstrate proficiency in using Partallfilm #10 and patch aide for repair tasks.Qualifications:Minimum of 2 years of experience in marine composite finishing, surfacing, or comparable hands-on fabrication roles.Extensive knowledge of sanding tools, fairing materials, and manual finishing techniques.Experience achieving Class A or near-Class A surface finishes is preferred but not mandatory.Exceptional attention to detail and the ability to perform repetitive, fine-surface work with patience.Familiarity with epoxy-based fillers, primers, and surface preparation chemicals.Capacity to read and interpret technical drawings and work instructions effectively.

Saronic Technologies stands at the forefront of maritime autonomy, committed to crafting innovative solutions that significantly enhance operational efficiency at sea through advanced autonomous platforms.Position Overview:In the role of Composites Technician specializing in Trim & Drill, you will play a crucial role in the fabrication of composite components including hulls, decks, and various structural parts. Your expertise will ensure that all components adhere to stringent tolerances and high-quality standards required for Department of Defense applications. This position demands meticulous attention to detail and a commitment to craftsmanship.Primary Responsibilities:Utilize hand tools, pneumatic tools, and shop equipment to trim, cut, and grind composite materials.Interpret technical drawings, trim outlines, and edge tolerances to execute finishing operations.Deburr edges, prepare bonding surfaces, and ensure precision fitment for assembly.Employ jigs, templates, and various measurement instruments (calipers, tape measures, gauges) to verify part geometries.Conduct surface preparation for painting, bonding, and secondary assembly processes.Maintain a clean, safe, and organized workspace in grinding and trimming areas.Identify defects, report non-conformances, and assist in rework or repair activities.Collaborate with layup, infusion, and quality assurance teams to facilitate smooth production workflow.Document work accurately and contribute to continuous process improvement initiatives.Utilize tablets for documentation and reporting.

Saronic Technologies is at the forefront of revolutionizing maritime autonomy, committed to creating innovative solutions that enhance naval operations through cutting-edge autonomous and intelligent platforms.Position Overview:In the role of Mold Maintenance - Composites Technician, you will play a crucial role in maintaining, repairing, and ensuring the operational readiness of composite molds utilized in the creation of high-performance marine structures. Your efforts will be pivotal in maintaining mold integrity, which directly impacts the quality, efficiency, and consistency of production.Key Responsibilities:Conduct thorough inspections of molds before and after usage to identify wear, damage, or contamination.Perform routine cleaning, polishing, and surface preparation of mold tools.Repair surface imperfections, cracks, or damage to flanges using appropriate resins and fillers.Apply and maintain various mold release systems including wax and semi-permanent coatings.Monitor mold usage cycles and assist in executing preventative maintenance schedules.Organize and maintain mold storage systems under proper environmental controls.Support the modification or refinement of mold tooling as per engineering changes.Collaborate with layup and finishing teams to troubleshoot and resolve mold alignment or part release challenges.Document all maintenance activities, repairs, and inspection results.Maintain an organized labeling system for molds.Assist with scribing, dimpling, and installation of flange monuments.Utilize electronic systems to track and manage assigned work tasks.Contribute to the development and adherence to mold maintenance and repair standards.Qualifications:Minimum of 2 years of hands-on experience with composite molds in a production or prototyping environment.Strong understanding of mold preparation, release systems, and composite tooling materials.Ability to diagnose and repair common mold issues such as scratches, pitting, and delamination.Familiarity with epoxy tooling systems, fiberglass or carbon fiber molds, and gelcoat repair.Detail-oriented with a strong commitment to maintaining high-gloss or tolerance-critical surfaces.

Saronic Technologies is at the forefront of transforming maritime autonomy, focused on pioneering innovative solutions that significantly improve maritime operations via advanced autonomous and intelligent platforms.Key Responsibilities:Programming, setting up, and operating 3-axis and 5-axis CNC mills and routers for kitting and airbrushing fiberglass and foam cores.Interpreting intricate engineering drawings, CAD models (such as SolidWorks, Fusion 360), and CAM files (like Mastercam, Fusion, or NX) to accurately produce components according to specifications.Collaborating closely with mechanical engineers, composites technicians, and systems integrators to ensure parts meet fit, function, and manufacturability standards.Choosing suitable tooling, feeds, speeds, and fixturing techniques for precise work on composite materials.Keeping CNC equipment, tools, and workspace in immaculate and safe condition.Conducting in-process quality checks and post-process inspections using calipers, micrometers, and other precision instruments.Participating in ongoing process enhancements within CNC workflows, fixture design, and the accuracy of composite parts.Qualifications:Required:A minimum of 3 years of experience as a CNC programmer/operator in a high-volume boat manufacturing environment.Extensive experience with CAM software (Fusion 360, Mastercam, NX, or equivalent).Proficient in reading and interpreting technical drawings and GD&T.Comfortable operating in a startup or fast-paced R&D environment.Exceptional attention to detail and self-motivation.Capable of lifting up to 50 lbs.Ability to distinguish different fiberglass types and designs.Preferred:Familiarity with 5-axis machines and multi-axis toolpath strategies.Prior experience in the maritime composite manufacturing sector.Benefits:Medical Insurance: Comprehensive health insurance plans covering a broad spectrum of services.

Saronic Technologies is at the forefront of transforming maritime autonomy, dedicated to crafting innovative solutions that elevate maritime operations through cutting-edge autonomous and intelligent platforms.Position Overview:As a Composites Technician specializing in Hull & Deck Infusion, you will play a pivotal role in the infusion of high-performance composite components integral to the structure and systems of our advanced autonomous vessels. Your work will involve handling large molds, loading dry materials and stringers, setting up vacuum manifolds, executing bagging procedures, conducting drop tests, performing leak detection, maintaining vacuum catch pots, mixing resin and MEKP in precise ratios, and employing various infusion techniques. This hands-on position is essential to our manufacturing process and significantly influences the reliability and performance of our products.Key Responsibilities:Exhibit meticulous attention to detail and uphold industry-leading standards.Prepare molds and tooling for the composite layup and infusion processes.Execute precise hand layups utilizing dry fiber materials.Configure and carry out vacuum-assisted resin infusion processes.Mix and handle resins and hardeners, adhering to established safety protocols.Ensure proper installation of fiberglass layers to avoid bridging, wrinkling, and resin richness.Install core materials with minimal gaps.Maintain a clean, organized, and safety-compliant workspace.Interpret technical drawings, layup schedules, and process documentation using a tablet.Collaborate closely with engineering and quality teams to refine part design and manufacturability.Document completed work and identify areas for process improvements or quality enhancements.Exhibit a sense of urgency in all tasks.Prepare surfaces for fiberglass loading by mixing putty and deburring surfaces, along with additional duties as assigned.Requirements:A minimum of 2 years of practical experience in composite manufacturing, particularly in resin infusion within a high-rate boat-building environment.Demonstrated strong attention to detail, manual dexterity, and a quality-first mindset.Proven experience in vacuum bagging for hulls and decks.Ability to work independently in a fast-paced, iterative environment.

Saronic Technologies is at the forefront of transforming maritime autonomy, committed to crafting innovative solutions that elevate maritime operations through cutting-edge autonomous platforms.Position Overview:As a Composites Technician specializing in Small Parts Infusion, your primary responsibility will be to infuse high-performance composite components utilized in the structure and systems of our autonomous vessels. You will concentrate on small to medium-sized parts, employing techniques such as vacuum-assisted resin transfer molding (VARTM), liquid resin transfer molding (LRTM), and managing vacuum manifolds, while performing essential tasks such as bagging parts, conducting drop tests, maintaining vacuum catch pots, and mixing resin with MEKP in precise ratios. This hands-on role is essential to our manufacturing process, significantly influencing product reliability and performance.Key Responsibilities:Exhibit exceptional attention to detail and uphold industry-leading quality standards.Prepare molds and tools effectively for composite layup and infusion.Conduct precise hand layups using dry fiber materials.Set up and execute vacuum-assisted resin infusion processes.Mix and handle resins, hardeners, and other composite materials following safety protocols.Trim, demold, and finish small composite components to specified tolerances.Maintain a clean, organized, and safety-compliant workspace.Interpret technical drawings, layup schedules, and process documentation with the aid of a tablet.Collaborate closely with engineering and quality teams to refine part design and manufacturability.Document work performed and identify opportunities for process improvements or quality enhancements.

Join our innovative team at Braze as a Lead Design Engineer, where you'll play a crucial role in shaping our product's design and functionality. Your expertise will guide the design process, ensuring that our solutions are not only functional but also aesthetically pleasing and user-friendly. You will collaborate with cross-functional teams, utilizing your technical skills to lead design projects from concept to completion.

Join Tenstorrent as a Physical Design Engineer, where you will be at the forefront of cutting-edge semiconductor design. This role will involve working collaboratively with cross-functional teams to develop robust and efficient physical designs, ensuring optimal performance and manufacturability of our next-generation products.

Neuralink develops devices that connect directly with the human brain. The company’s technology focuses on restoring movement for people with paralysis, improving vision for those with impairments, and changing how people interact with digital systems. The Brain Interfaces Hardware Department leads the design of chip architecture and silicon systems for neural recording and stimulation. This group works on system-on-chip (SoC) solutions that support high-bandwidth brain-machine interfaces. Team members include engineers committed to advancing neurotechnology. Role overview The Physical Design and Verification Engineer manages the full physical design flow from RTL to GDSII. This includes: Synthesis Placement Clock tree synthesis Detailed routing Optimization Physical signoff verification Locations This position is based in Austin, Texas or Fremont, California.

Join Efficient Computer as a Lead RTL Design Engineer, where you will spearhead the development of cutting-edge RTL designs for our innovative hardware products. In this pivotal role, you will collaborate with a dynamic team to deliver high-performance solutions that meet the demands of our clients.

Wehrtyou is seeking a Physical Design Engineer to develop advanced physical layouts for semiconductor products. This role directly shapes hardware design and implementation, balancing high performance with manufacturability. Key responsibilities Create and refine physical layouts for semiconductor devices Collaborate with multidisciplinary teams to optimize designs Ensure layouts comply with industry standards for quality and reliability Support product delivery from initial concept through manufacturing Locations Austin, TX, United States Boulder, Colorado, United States Chicago, Illinois, United States London, United Kingdom New York, NY, United States Seattle, Washington, United States Work culture Engineers at Wehrtyou contribute to projects that help shape the future of technology. The team emphasizes collaboration, technical growth, and practical problem-solving.