Mechanical Design Engineer - Turboshaft Systems

About Archer Aviation Archer Aviation is developing all-electric vertical takeoff and landing aircraft to advance sustainable air mobility. The company’s aircraft is designed to carry four passengers, with a focus on reducing noise and supporting environmental goals. Archer values a diverse and inclusive workplace, encouraging collaboration and recognizing the unique contributions of each team member. Role Overview The Mechanical Design Engineer - Turboshaft Systems will support the design and development of a new Turbogenerator system. This role is based in San Jose, California. Main Responsibilities Create detailed models of components and large assemblies for the Turbogenerator using Siemens NX. Develop master geometry and skeleton models. Design components with manufacturability and assembly in mind. Produce accurate 2D manufacturing drawings. Apply geometric dimensioning and tolerancing standards. Oversee the design process, working closely with manufacturing and testing teams. Maintain bills of materials, test protocols, and design guidelines. Present design concepts clearly to stakeholders. Work collaboratively with supply chain, quality assurance, manufacturing, and engineering teams.

About Archer Aviation Archer Aviation, based in San Jose, California, designs and builds all-electric vertical takeoff and landing (eVTOL) aircraft. The company focuses on sustainable air mobility, working to create aircraft that can carry four passengers with low noise emissions. Archer values ambitious goals and embraces complex challenges. The team believes that a diverse and inclusive workplace leads to stronger ideas and better outcomes. Every team member’s perspective is welcomed and respected.

About Archer Aviation Archer Aviation designs and builds all-electric vertical takeoff and landing aircraft in San Jose, California. The company focuses on sustainable air mobility, aiming to reduce noise pollution while advancing environmentally responsible aviation. The team is dedicated to developing, manufacturing, and operating aircraft that put environmental priorities at the forefront. Archer values ambitious problem-solving and believes a diverse workforce brings better ideas and outcomes. The company works to create an inclusive and equitable workplace where every team member is supported and celebrated. Role Overview: Technical Lead for Turboshaft Systems This position leads the technical direction and execution for turboshaft systems within a hybrid powertrain and turbogenerator platform. The Technical Lead guides a multidisciplinary team and ensures smooth integration and certification of the turboshaft in Archer’s aircraft. What You Will Do Lead the development and management of the turboshaft in a complex hybrid powertrain and turbogenerator system. Oversee a team of specialists in fuel systems, turbine design, exhaust, and thermal management. Ensure the turboshaft is successfully integrated, tested, and certified within the aircraft model. Optimize turboshaft design for compatibility with the overall powertrain. Identify and address technical, certification, and program risks to support project goals. Direct testing, verification, and certification activities for turboshaft systems. Define integration challenges for turboshaft subsystems, collaborating with mechanical and systems engineers. Develop strategic plans for turboshaft and turbogenerator advancement as part of the hybrid powertrain program.

Archer Aviation is a pioneering aerospace company headquartered in San Jose, California, focused on developing an all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to revolutionize air mobility by providing sustainable transportation solutions that are not only efficient but also environmentally friendly, allowing for quiet and smooth journeys with a capacity for four passengers.We are committed to pushing the boundaries of technology and innovation, and we recognize that a diverse workforce enhances our problem-solving capabilities and fosters greater creativity. At Archer, we strive to build an inclusive workplace that values each individual's unique contributions and perspectives, empowering our team to achieve collective success.What You'll Do:Design and develop inlet and exhaust ducting systems for turboshaft engines and advanced thermal management systems on aircraft.Collaborate with aerothermal analysts to refine duct designs for optimal performance, pressure drop, and thermal efficiency.Take ownership of the design process from initial concept through to production, including requirements gathering, 3D CAD modeling, detailed drawings, bill of materials (BOM), and design verification.Engage with suppliers to oversee fabrication processes, ensuring adherence to design specifications and troubleshooting manufacturing challenges.Select and integrate commercial off-the-shelf (COTS) components such as bellows, flex joints, seals, and clamps as needed.Develop and execute verification testing strategies for ducting systems, supporting thorough qualification testing including pressure, temperature, and vibration assessments.Establish and nurture supplier relationships to lead procurement efforts effectively.Collaborate with Systems Engineering and aerothermal analysts to document and validate design requirements thoroughly.

Are you a detail-oriented Mechanical Engineer with a passion for optimizing designs for manufacturability? Join our dynamic team at Etched, where you will play a key role in enhancing our product development process. In this position, you will collaborate with cross-functional teams to ensure our designs meet manufacturability standards, ultimately driving efficiency and quality in our operations.

Archer is a pioneering aerospace firm headquartered in San Jose, California, dedicated to developing all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air mobility, and we are committed to designing, manufacturing, and operating an aircraft capable of carrying four passengers while minimizing noise pollution.At Archer, we strive for excellence and embrace the complexity of our challenges. We firmly believe that a diverse workplace fosters smarter solutions, insightful perspectives, and collective success. We are devoted to creating an inclusive and equitable environment that honors our differences and uplifts every member of our team.What You'll Do:Design and integrate the complete fuel system for a hybrid-electric prototype aircraft.Take ownership of the fuel system architecture, including tanks, pumps, valves, filters, lines, and associated components.Utilize 3D CAD to layout and control the configuration of the fuel system, ensuring proper routing and integration with the airframe.Collaborate with suppliers to identify, evaluate, and select suitable COTS components for fuel system applications.Lead trade studies and design analyses aimed at optimizing weight, reducing system complexity, and enhancing reliability.Oversee the prototype development process, including requirements, design, BOM, procurement, assembly, testing, and qualification.Perform calculations to verify fuel flow rates, pressure drops, pump performance, and system margins.Work closely with powertrain, airframe, and structural teams to ensure effective fuel system integration.Develop verification testing strategies and support rigorous qualification testing (flow testing, pressure testing, vibration, etc.).Create and review technical drawings, system schematics, installation plans, and specifications.Assist in developing and documenting requirements for fuel system performance and safety.Conduct design reviews and present trade study findings to stakeholders.

About Archer Aviation Archer Aviation, based in San Jose, California, develops all-electric vertical takeoff and landing (eVTOL) aircraft. The company focuses on sustainable air mobility, designing aircraft that can carry four passengers while minimizing noise. Archer values creative problem-solving and believes that a diverse, inclusive workplace leads to stronger results and a more supportive team environment. Role Overview The Thermal Systems Design Engineer for Hybrid Powertrain will lead the design and development of advanced thermal systems for Archer’s hybrid aircraft. This role involves hands-on engineering, collaboration across disciplines, and responsibility for the system’s full lifecycle, from concept to implementation. Key Responsibilities Design, model, and implement innovative thermal systems for hybrid aircraft. Select technologies and materials suited for complex thermal management challenges. Ensure thermal systems are lightweight, efficient, and cost-effective. Validate performance through rigorous testing and system definition. Work closely with stakeholders to deliver a comprehensive thermal solution. Oversee the thermal system’s lifecycle, coordinating with manufacturing and testing teams. Present design concepts and project updates to stakeholders. Collaborate with supply chain, quality assurance, manufacturing, and stress/FEA engineers.

Join Archer Aviation, a pioneering aerospace company located in San Jose, California, dedicated to revolutionizing air mobility through our all-electric vertical takeoff and landing aircraft. Our mission is to enhance sustainable air travel, enabling four passengers to fly with minimal noise and maximum efficiency.At Archer, we set ambitious goals and tackle complex challenges. We value diversity within our team, believing it fosters innovation and drives success. We are committed to creating an equitable and inclusive workplace that celebrates the unique contributions of every team member.What You’ll Do:Design structural components and oversee the integration of propulsion systems for full-scale prototype aircraft.Create detailed designs for metallic parts and assemblies to support propulsion mounting, structural interfaces, and overall system integration.Lead the prototype development process, managing requirements, design, BOM, procurement, assembly, and testing.Conduct structural analysis and hand calculations to verify component performance, load paths, and interfaces.Execute Finite Element Analysis (FEA) on metallic structures and mounting systems to validate design integrity.Collaborate with suppliers to select Commercial Off-The-Shelf (COTS) solutions for mounts, fasteners, brackets, and more.Develop comprehensive verification testing strategies and ensure your designs undergo rigorous testing protocols.Create and review technical drawings, plans, and specifications to ensure quality and accuracy.Support the documentation and development of project requirements.Manage supply chain processes and lead procurement efforts for your design components.Work collaboratively with our multi-disciplinary engineering team to drive innovative solutions.

Archer Aviation is an innovative aerospace company located in San Jose, California. We are on a mission to revolutionize sustainable air mobility through the design and manufacture of an all-electric vertical takeoff and landing (eVTOL) aircraft capable of carrying four passengers with minimal noise emissions.At Archer, we are driven by high aspirations and challenging problems. We believe that a diverse workforce enhances our intelligence, fosters better insights, and ultimately contributes to our collective success. We are committed to creating an equitable and inclusive environment that values our differences and celebrates every member of our team.About the RoleWe are looking for a skilled Mechanical Systems Engineer – Actuators to take the lead in designing, integrating, and validating high-performance electromechanical actuators for our prototype aircraft. This position necessitates a profound understanding of actuator system architecture, requirements development, and performance analysis, alongside multidisciplinary collaboration across electrical, controls, and thermal domains. As part of our prototype engineering team, you will be instrumental in laying the groundwork for our production engineering efforts.What You’ll DoDesignOversee the design and development of high-performance, flight-critical electromechanical actuation systems from initial concept to flight testing.Collaborate with suppliers to determine make vs. buy strategies.Conduct trade studies to enhance system architecture and reduce mass.Work alongside suppliers and peer design leads in actuator control, flight controls, GNC, power systems, airframe, and software to create an optimized integrated system for the aircraft.Develop and evaluate CAD models, drawings, and engineering specifications.Create and maintain actuator-system specifications and detailed component requirements.Establish and sustain system-level models to validate actuator performance.Analysis & ValidationDesign test plans and develop test benches for component development and validation.Analyze test results and implement design enhancements based on findings.Act as the primary technical authority for diagnosing and resolving critical design and development challenges.LeadershipGuide the team in best practices and innovative approaches to actuator systems engineering.

Join Antora as a Senior / Staff Mechanical Engineer specializing in Fluid Systems, where you will play a pivotal role in the design and development of innovative fluid management solutions. Your expertise will contribute to cutting-edge projects aimed at enhancing performance and efficiency in various applications. Collaborate with a talented team of engineers to drive advancements in fluid system technologies.

Archer Aviation is a pioneering aerospace company located in San Jose, California, focused on developing an all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to revolutionize sustainable air mobility, creating a future where air travel is quiet and efficient, allowing for the transportation of four passengers with minimal environmental impact.We believe that tackling ambitious challenges requires diverse perspectives, and we are committed to fostering an equitable and inclusive workplace. We celebrate the uniqueness of our team members, which we see as a vital component of our success.Responsibilities include:Lead the mechanical design of high-power electrical assemblies, such as DC-DC converters, chargers, and motor controllers, from concept to final design.Collaborate with mechanical, systems, electrical, safety, and manufacturing engineers to optimize designs for overall vehicle performance.Tackle electric propulsion design challenges, including thermal management, high voltage electrical isolation, interconnects, and environmental sealing.Execute detailed designs of components like plastic housings, metal brackets, insulation systems, high voltage connectors, and structural supports.Conduct design analyses to ensure compliance with requirements through heat transfer, thermal analysis, structural calculations, and failure mode analysis.Develop engineering test plans for prototypes.Create assembly and component drawings, and partner with suppliers for manufacturing.Lead prototype builds and design validation testing.

Archer Aviation is an innovative aerospace company located in San Jose, California, dedicated to revolutionizing air travel through the development of an all-electric vertical takeoff and landing aircraft. Our mission is to promote sustainable air mobility by designing and manufacturing aircraft that can transport four passengers while minimizing noise.We set ambitious goals, tackle complex challenges, and believe that a diverse workforce enhances our intelligence, drives better insights, and ultimately leads to greater success. We are committed to fostering an equitable and inclusive workplace that recognizes and celebrates our diverse team members.Key Responsibilities:Lead the mechanical design of high-power electrical assemblies, including DCDC converters, chargers, and motor controllers, from concept to completion.Collaborate with cross-functional teams, including mechanical, systems, electrical, safety, and manufacturing engineers, to optimize designs for overall vehicle performance.Address electric propulsion design challenges encompassing thermal management, high-voltage electrical isolation, interconnects, shock and vibration resistance, environmental sealing, and electromagnetic interference.Execute detailed designs for components such as plastic housings, sheet metal brackets, insulation systems, high voltage connectors, fasteners, and structural supports.Perform thorough analyses to ensure designs meet regulatory and performance requirements, utilizing heat transfer, thermal analysis, design for assembly, structural calculations, and failure mode analysis.Develop and implement engineering test plans for design validation.Create assembly and component drawings and collaborate with suppliers for manufacturing.Oversee engineering prototype builds and design validation testing.

Archer is an innovative aerospace company located in San Jose, California, dedicated to revolutionizing air travel with our all-electric vertical takeoff and landing aircraft. Our mission centers on advancing sustainable air mobility by designing, manufacturing, and operating aircraft capable of carrying four passengers while maintaining minimal noise levels.We set ambitious goals and tackle complex challenges, believing that a diverse workplace fosters smarter solutions and deeper insights. We are committed to creating an equitable and inclusive environment that values and supports all team members.As a Mechanical Design DMU & Mass Properties Engineer, you will be integral to our Advanced Projects group, focusing on aircraft-level NX CAD management. Our team, although small, is comprised of a diverse group of multi-disciplinary engineers dedicated to the rapid development of future aircraft concepts, propelling them from initial ideas to experimental flight testing on aggressive timelines. In this role, you will be pivotal in managing the CAD environment, ensuring a robust product structure and tracking various aircraft configurations for Archer’s future hybrid-electric aircraft platform.

Electric Hydrogen is dedicated to revolutionizing the energy landscape by producing green hydrogen through renewable electrolysis, aiming to decarbonize our world! Our talented team is our greatest asset, enabling us to deliver hydrogen at prices that compete with fossil fuels for heavy industries.We are currently seeking a Staff Mechanical Engineer - Power Systems to join our innovative team in San Jose, CA. In this role, you will spearhead the development of cutting-edge power electronics products aimed at generating green hydrogen, guiding projects from prototype through to production.

Role overview The Power Systems Design Engineer at Etched will design, analyze, and refine power systems to meet demanding performance and reliability standards. This position requires working closely with colleagues from multiple teams to create solutions that align with client requirements. What you will do Design and analyze power systems for both new initiatives and ongoing projects Apply engineering best practices to enhance system performance and reliability Collaborate with cross-functional teams to develop and implement tailored solutions Location This role is based in San Jose.

Archer Aviation is a pioneering aerospace company located in San Jose, California, focused on designing and building an innovative all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission is to redefine sustainable air mobility, creating aircraft for four passengers that operate with minimal noise and environmental impact.At Archer, we embrace the challenges of the aerospace industry, fostering a workplace that celebrates diversity and inclusion. We believe that varied perspectives lead to smarter solutions and innovations that propel us toward our ambitious goals. Join us as we build an equitable and supportive environment for all team members.Key Responsibilities:Lead the mechanical design of high-power electrical assemblies, including DC-DC converters, chargers, and motor controllers from concept to completion.Work collaboratively with mechanical, systems, electrical, safety, and manufacturing engineers to enhance design performance across the vehicle.Tackle electric propulsion design challenges, such as thermal management, high-voltage electrical isolation, shock and vibration resistance, environmental sealing, and electromagnetic interference.Oversee the detailed design of components, including plastic housings, sheet metal brackets, insulation systems, high-voltage connectors, fasteners, and structural supports.Conduct thorough analysis to ensure designs meet requirements through heat transfer calculations, thermal analysis, assembly design, structural evaluations, and failure mode analysis.Develop comprehensive engineering test plans for design validation.Create precise assembly and component drawings, coordinating with suppliers for manufacturing.Lead prototype builds and validation testing to ensure design functionality and performance.

Archer Aviation is a pioneering aerospace firm located in San Jose, California, dedicated to revolutionizing air travel through its all-electric vertical takeoff and landing (eVTOL) aircraft. Our mission focuses on enhancing sustainable air mobility while providing a quiet and efficient solution for urban transportation.At Archer, we set ambitious goals and face complex challenges. We believe that a diverse workforce fosters innovation, drives better insights, and leads to collective success. We are committed to creating an equitable and inclusive environment that values each team member's unique contributions.Key Responsibilities:Contribute to the development and optimization of the aircraft’s Landing Gear and Brake Control Systems.Assist in the design, construction, and execution of flight hardware, test stands, procedures, and reports for qualification, certification, and production purposes.Participate in team projects related to landing gear, brake systems, wheels, and tires.Lead the technical direction of designs and oversee their delivery, testing, and certification processes.Collaborate with suppliers and manage technical deliverables efficiently.Conduct performance analyses, including braking energy and multibody dynamic landing assessments.Create, review, and execute tests at both equipment and system levels.Analyze flight test data for insights and improvements.

About MashginMashgin is revolutionizing the checkout experience for more than 40 million users globally. Our innovative kiosks allow customers to simply place their items, while our advanced AI processes their entire order in under one second—making long lines a thing of the past.Our technology facilitates over 1 billion transactions at popular venues, including more than half of the professional sports teams in the U.S., 4,000 convenience stores, major airports, and universities.We are not only developing state-of-the-art AI but are also driving tangible real-world impact and creating unforgettable experiences. As a well-funded Series B company, we proudly stand out as one of the few AI startups that have already achieved profitability.The secret to our success? A culture rooted in extreme ownership, autonomy, and an unwavering focus on customer satisfaction. At Mashgin, we are dedicated to building something extraordinary by challenging the norms. We prioritize what truly matters: crafting an exceptional product that leaves people amazed. Our focus is on long-term solutions rather than short-term gains. If you excel in a culture of uncompromising excellence and desire to see your contributions make a significant impact, you belong with us.Position SummaryMashgin is on the lookout for a Senior Mechanical Product Design Engineer to enhance our hardware engineering team. In this pivotal role, you will be instrumental in developing the next generation of Mashgin kiosks, navigating the journey from concept to mass production in a dynamic, cross-functional setting.This position is hybrid, requiring you to be onsite in San Jose, CA at least 2 days per week.

Western Digital is on the lookout for a skilled Mechanical Engineer with a minimum of 5 years of experience to design, develop, and validate mechanical components and assemblies for our Hard Disk Drive (HDD) product line and innovative data storage solutions. The selected engineer will lead precision mechanical design efforts for head-disk assemblies (HDA), actuators, base castings, and enclosures while adhering to rigorous performance and reliability standards.Key Responsibilities:HDD-Specific Design & Development:Craft precision mechanical components for HDD systems, including:Head Stack Assembly (HSA) involving actuators, flex circuits, and voice coil motorsBase casting and top cover assembliesSpindle motor integration and mounting systemsShock dampening and vibration isolation structuresBreather filters and contamination control featuresUtilize advanced CAD (SolidWorks/NX) to develop parts with tight tolerancesApply geometric dimensioning and tolerancing (GD&T) for drawings and 3D models, ensuring communication of ideal part specifications with allowable variations to meet functional requirements.Design components for ultra-clean operating environments (Class 10/100 cleanroom).Leverage 3D printing and rapid prototyping techniques to conduct design validation testing.Analysis & Simulation:Conduct Finite Element Analysis (FEA) on structural components to optimize shock resistance and stiffness.Perform modal analysis to avoid resonance in actuator systems.Execute tolerance stack-up analysis for critical assemblies.Testing & Validation:Design test fixtures and develop testing protocols for design validation.Carry out environmental tests for shock, vibration, and thermal cycling.Lead failure mode analysis and implement corrective actions (FMEA, root cause analysis).Cross-Functional Collaboration:Engage with recording heads, media, firmware, and servo teams for seamless system integration.Collaborate with suppliers to establish specifications and maintain quality standards.

Archer Aviation Inc., situated in the heart of San Jose, California, is at the forefront of aerospace innovation, dedicated to constructing an all-electric vertical takeoff and landing aircraft. Our mission is to revolutionize sustainable air mobility by designing, manufacturing, and operating aircraft capable of transporting four passengers with minimal noise pollution.We aspire to achieve remarkable advancements while tackling complex challenges. We firmly believe that a diverse workforce enhances our intelligence, drives insightful solutions, and propels us toward collective success. Our commitment is to foster an equitable and inclusive work environment that honors our differences and uplifts every member of our team.The RoleIn the role of Senior Staff Systems Engineer within the Air Vehicle group, you will focus on Mechanical Systems. You will engage with various systems including Landing Gear, Cabin, Closures, Environmental Control, Airframe, and Wiring Systems, taking on the responsibility as the Systems Engineer for one of these areas. This position allows you to bridge the gap between high-level aircraft requirements and detailed component design, ensuring seamless interfaces. Your confidence and eagerness to collaborate with multiple disciplines across the organization will be paramount to your success.What you’ll do:Collaborate with diverse engineering teams to design high-reliability, safety-critical systems for aircraft.Lead the preparation of reports to validate system readiness for key milestone reviews.Serve as the primary contact for system-level documentation and reporting.Drive change management initiatives within a complex product structure.Lead efforts to:Conduct operational and functional analyses,Define and decompose system requirements with traceability through overall system architecture,Establish and manage technical/programmatic performance metrics (cost, weight, performance objectives),Ensure full compliance with safety regulations.Collaborate with technical disciplines to develop verification plans, support verification/test planning, and conduct assessments to demonstrate compliance with system requirements.