RF/Electrical Engineer

About LynkLynk is a pioneering technology company that specializes in satellite direct-to-device (D2D) communication. As the only firm to hold a commercial license from the FCC for D2D operations, Lynk enables mobile network operators' subscribers to seamlessly send and receive text messages from space using standard mobile devices without any modifications.…

Join Lynk, a Pioneer in Satellite TechnologyAt Lynk, we are revolutionizing global communication by bringing satellite direct-to-device (D2D) technology to the world. As the only company with a commercial license from the FCC to operate a D2D system, we enable mobile network operators’ subscribers to send and receive text messages from space using their standard mobile devices. With proven service on all seven continents and regulatory approvals in over 30 countries, we are expanding our reach through numerous commercial contracts covering approximately 50 countries.Our mission is to connect the 8 billion people on the planet, ensuring that everyone, everywhere, can communicate through the devices they already own. By joining our team, you will have the unique opportunity to impact billions of lives, helping to lift people out of poverty and save lives in the process.Position OverviewAs a Senior RF/Electrical Engineer at Lynk, you will play a crucial role in the design and development of our nanosatellite communications payload and future constellation network. Your responsibilities will span across analysis, design, implementation, and optimization of systems crucial for communication. You will be involved in link budget analyses, capacity dimensioning, coverage planning, interference analysis, and the iterative design and testing of payload hardware and software. Familiarity with software-defined radios, FPGAs, single-board computers, and various electronic components will be essential. Additionally, you will engage in hands-on activities such as circuit assembly and RF channel simulation.If you thrive in an innovative environment and can tackle unconventional problems with creativity, we would love to hear from you!

Join the Future of Connectivity at LynkAt Lynk, we are pioneering the revolutionary satellite direct-to-standard phone technology (sat2phone), holding the unique distinction of being the only company with a commercial license from the FCC to operate a commercial sat2phone system. Our groundbreaking service enables mobile network operators' subscribers to effortlessly send and receive text messages from space using their existing mobile devices without any modifications. Our technology has been rigorously tested across all seven continents and received regulatory approvals in over 30 countries, as we actively expand our commercial deployment based on more than 40 contracts with mobile network operators spanning approximately 50 countries.Our vision is clear: to connect all 8 billion people globally with the standard phone they already possess. No matter where they are, we believe everyone deserves to stay connected.By joining Lynk, you will play a crucial role in transforming the lives of billions, providing mobile broadband access to many, lifting countless individuals out of poverty, and contributing to saving lives worldwide.Position Overview:As a Principal RF/Electrical Engineer, you will take on a multifaceted role that encompasses the realms of radio frequencies, electronics, hardware, and software. You will engage in the analysis, design, implementation, optimization, and enhancement of our satellite communication systems, which will ultimately shape our future constellation network, including inter-satellite and multi-orbit links. Key deliverables will include link budget analyses, system dimensioning for coverage and capacity (including traffic analysis and simulation), initial system design, coverage planning, frequency planning, and interference analysis with mitigation strategies.You will also support the iterative design and testing of our satellite communication systems' hardware, electronics, and software, collaborating with software-defined radios, single-board computers, FPGAs, SoCs, processors, LNAs, and filters. Your involvement will extend to payload antenna selection and design. Hands-on experience with soldering, spectrum analyzers, circuit assembly on breadboards, and RF channel simulation will be essential.If you thrive in dynamic environments, enjoy tackling diverse challenges, and possess a proven record of innovative problem-solving, we eagerly anticipate your application!

About LynkLynk is a pioneering company in satellite direct-to-device (D2D) technology, holding the world’s exclusive commercial license from the FCC to operate a commercial D2D system. We empower mobile network operators by enabling their subscribers to send and receive text messages to and from space using standard, unmodified mobile devices. Our services have been successfully tested across all seven continents and have received regulatory approvals in over 30 countries, with active deployments supported by more than 40 commercial service contracts spanning approximately 50 countries.Our groundbreaking technology is set to connect all 8 billion people globally, allowing them to communicate using the phones they already own, no matter where they are.By joining Lynk, you will play a vital role in transforming the lives of billions, contributing to global connectivity, economic empowerment, and even saving lives.Job SummaryAs a Senior Electrical Engineer at Lynk, you will leverage and expand your expertise in electronics and RF hardware and software. Your background in satellite design is crucial for this role. You will engage in the analysis, design, implementation, optimization, and enhancement of subsystems for our nanosatellite bus and its communication payload. Working collaboratively with fellow Electrical Engineers, you will design and assemble circuit boards and participate in the iterative design, integration, and testing of our nanosatellite bus and payload electronics hardware and software. Proficiency with simulation and design tools and test equipment for validation is essential, as is comfort in laboratory environments. Your work will specifically involve the use of spectrum analyzers and other RF equipment, given our payloads operate across frequencies from UHF to Ka Band. You will also contribute to the selection of components and vendors as part of the design team.If you thrive on challenges and possess a history of innovative problem-solving, we would be excited to meet you!

ABOUT ROCKET LABRocket Lab is a pioneering end-to-end space solutions company that provides responsive launch services, comprehensive spacecraft design and manufacturing, and innovative payloads and satellite components. Our mission is to democratize access to space. The rockets and satellites we create facilitate some of the most critical space missions worldwide, advancing scientific exploration, Earth observation, climate change initiatives, national security, and technology demonstrations.Our Electron rocket has established itself as the second most frequently launched rocket in the U.S. annually, successfully delivering over 230 satellites to orbit. We are also advancing the development of Neutron, our upcoming medium-lift reusable launch vehicle designed for larger constellation deployments. Our Space Systems division specializes in the design and manufacture of a diverse range of satellites, payloads, and their components, including spacecraft selected for NASA’s missions to the Moon and Mars, as well as components utilized in the James Webb Space Telescope.SPACE SYSTEMSAt Rocket Lab, we are not just launching rockets — we are shaping the future of space exploration. Our Space Systems team is responsible for developing everything from complete spacecraft to high-precision payloads and the subsystems that allow them to thrive in space, such as solar panels, flight software, star trackers, optical systems, and radios.Our dedicated Space Systems team has supported over 1,700 missions, ranging from interplanetary exploration to national security operations. We have collaborated with esteemed partners, including NASA, the Space Development Agency, and the U.S. Space Force, building spacecraft and components for missions to the Moon and Mars. Whether it's a singular high-performance spacecraft, a constellation, or the vertically integrated components that enable them to reach space, our world-class Space Systems team is empowering some of the most ambitious space endeavors.SENIOR RF PAYLOAD FORMULATION SYSTEMS ENGINEER I/II – SECRET CLEARANCELocated at Rocket Lab's facility in Chantilly, VA, the Senior RF Payload Formulation Systems Engineer will take charge of leading the formulation and development of advanced RF payload systems. This role requires an innovative mindset and a commitment to excellence as we push the boundaries of space technology.

About LynkLynk is at the forefront of innovation with its groundbreaking satellite direct-to-device (D2D) technology. As the sole provider with a commercial license from the FCC to operate a D2D system, Lynk empowers mobile network operators to facilitate seamless text messaging to and from space using standard unmodified mobile devices. Our services have been rigorously tested across all seven continents and hold regulatory approvals in over 30 countries. With more than 40 commercial contracts in place, we are actively deploying our solutions in approximately 50 countries, ensuring that everyone, everywhere, can stay connected.Join us at Lynk and play a critical role in transforming global communication. Your contributions will directly impact billions, enhance mobile broadband access for underserved communities, and have the potential to save lives.Job SummaryIn your role as an Electrical Engineer, you will embrace diverse responsibilities that leverage and expand your expertise in electronics, RF hardware, and software. A background in satellite bus design is essential for this position. You will engage in analyses, design, implementation, optimization, and enhancement of subsystems integral to our nanosatellite bus and communications payload. Collaborating with fellow engineers, you will design and assemble circuit boards while contributing to the iterative design, integration, and testing of our electronics hardware and software. Proficiency with simulation and design tools, as well as validation test equipment, is crucial for success in our lab environments. Your work will require the use of spectrum analyzers and other RF equipment, given our payloads operate across UHF to Ka Band frequencies. Additionally, you will contribute to component and vendor selections as part of the design team.If you thrive on challenges and possess a history of innovative problem-solving, we are eager to meet you!Core ResponsibilitiesAs a key member of our small but dynamic team, you will engage in multifaceted engineering work spanning electrical, RF, and software domains, primarily focusing on schematic and layout design.Design spacecraft bus and payload hardware, including single-board computers, FPGAs, SoCs, processors, sensors, SDRs, LNAs, filters, amplifiers, and more.

Electrical Engineering InternLocation: Chantilly, VA About Lynk Lynk builds satellite direct-to-device (D2D) technology that lets people send and receive text messages from space using ordinary mobile phones. As the only company with a commercial FCC license for D2D systems, Lynk partners with mobile network operators to extend connectivity worldwide. The service has been tested on every continent, holds regulatory approvals in over 30 countries, and is expanding through more than 40 commercial contracts across about 50 nations. Lynk’s mission: keep all 8 billion people connected, wherever they are, using the phones they already own. The team’s work brings mobile broadband to billions, helps reduce poverty, and can save lives. Role Overview The Electrical Engineering Intern will work alongside experienced engineers to design, develop, and test electronics and RF hardware for Lynk’s nanosatellite bus and communications payload. This hands-on role spans schematic design, board integration, lab testing, and support across multiple satellite subsystems. Interns gain exposure to real spacecraft hardware and collaborate with cross-functional engineering teams. What You Will Do Help design and develop electronics for the spacecraft bus and payload, including schematic creation, component selection, and layout reviews. Support assembly, initial bring-up, and testing of circuit boards, troubleshooting and debugging with guidance from senior engineers. Participate in lab testing and validation using standard electrical and RF test equipment. Assist with simulation, analysis, and documentation of circuit and subsystem performance. Help develop firmware or test software for board validation and testing. Contribute to technical documentation, test reports, and design records. Join design reviews and integration efforts with electrical, RF, software, and mechanical engineering teams.

About Lynk GlobalLynk Global is a pioneering company that has developed satellite direct-to-device (D2D) technology. As the only entity with a commercial license from the FCC to operate a D2D system, Lynk empowers mobile network operators to enable their subscribers to send and receive text messages from space using standard mobile devices. Our service has been successfully tested across all seven continents, boasts regulatory approvals in over 30 countries, and is being commercially deployed through more than 40 contracts with mobile network operators covering approximately 50 countries.Our groundbreaking technology aims to connect all 8 billion people on Earth, utilizing the standard phones they already own, ensuring connectivity no matter where they are.Joining Lynk means you will have the opportunity to make a significant impact on billions of lives. Your mission will include providing mobile broadband access to underserved populations, alleviating poverty for millions, and contributing to life-saving communications worldwide.Job SummaryAs a Digital/Mixed Signal Design Electrical Engineer at Lynk, you will leverage your expertise in electronics and PCB design to contribute to the development of advanced mixed signal PCBAs for our spacecraft. You will engage in schematic capture, layout design, and analysis, working with high pin-count FPGAs, SoCs, and ADC/DACs. Collaboration with hardware and firmware engineers will be essential as you participate in the board bring-up process. Candidates should be proficient in both design and laboratory environments and possess experience in designing systems for extreme conditions.

Join BryceTech as a Mission Engineer, where you will play a crucial role in our innovative projects. As a Mission Engineer, you will be responsible for designing and implementing cutting-edge solutions that support our mission-critical operations. Collaborate with a talented team of engineers and contribute to the development of our advanced technologies.

Join Ensco, Inc., a leader in providing cutting-edge engineering solutions, as a Mechanical Engineer III. In this role, you will leverage your engineering expertise to design, develop, and enhance mechanical systems that meet our clients' needs. You will collaborate with a team of talented engineers and contribute to innovative projects that drive technological advancement.

Join BryceTech as a Space Systems Engineer, where you will play a pivotal role in the design, development, and integration of advanced space systems. Collaborate with a dynamic team of engineers and scientists to push the boundaries of space exploration and technology. Your contributions will directly impact critical missions and projects that shape the future of space endeavors.

Join us at usm2 as a Build and Release Engineer in Chantilly, Virginia, where you will play a crucial role in our development team. You will be responsible for streamlining our build and release processes, ensuring that our software is delivered efficiently and effectively. This is a fantastic opportunity for a motivated individual eager to kickstart their career in software engineering.

Company OverviewFor over 25 years, Edgesource Corporation has been at the forefront of innovative technology solutions, dedicated to serving various governmental sectors including the Department of Defense (DOD), Department of Homeland Security (DHS), Department of State (DOS), the U.S. Intelligence Community, and law enforcement agencies, among others. Our mission is to tackle the most pressing challenges in technology and cybersecurity, providing specialized support for critical initiatives such as the DOD Counter Unmanned Aerial Systems (CUAS) mission and collaborating closely with the DHS Cybersecurity & Infrastructure Security Agency (CISA). Joining Edgesource means contributing to meaningful and impactful projects that make a difference.Position OverviewWe are seeking a talented Data Engineer to join our dynamic team, focusing on groundbreaking projects that support our mission objectives. In this role, you will manage and structure vast amounts of data for integration into a larger enterprise system that is being custom developed. This initial position is funded for a duration of 9–12 months, closely aligned with our mission deliverables and development timelines. This role requires on-site collaboration at our client location.ResponsibilitiesDesign, develop, and maintain ETL/ELT pipelines for both batch and real-time data processing utilizing Python and SQL.Integrate data from diverse sources, including databases, APIs, streaming platforms, PDFs, and MS Office files.Construct scalable data architectures to accommodate analytics and machine learning workloads.Enhance data processing and queries for optimal performance and cost efficiency in AWS S3.Familiarity with PySpark or other big data frameworks is advantageous for future scalability of pipelines.Develop and execute web scraping and data ingestion workflows to gather open-source data, producing structured datasets and visualizations for analytics and stakeholder engagement.Data Management & OptimizationCollect, clean, and validate extensive volumes of structured and unstructured data.Monitor data versions, implement quality checks, and ensure data reliability.Design and optimize data storage solutions in AWS S3, managing raw, intermediate, and finalized datasets.Implement robust data governance practices, including detailed documentation, cataloging, lineage tracking, and security measures.

About LynkLynk is a pioneering company in the realm of satellite direct-to-device (D2D) technology, holding the unique distinction of being the only organization with a commercial license from the FCC to operate a D2D system. Our innovative solutions empower mobile network operators' subscribers to seamlessly send and receive text messages from space using standard, unmodified mobile devices. Lynk's technology has been rigorously tested across all seven continents, garnering regulatory approvals in over 30 countries, and is currently being rolled out commercially, backed by more than 40 MNO service contracts covering approximately 50 countries.Our groundbreaking technology aims to connect all 8 billion people globally, ensuring that everyone can stay in touch with the device they already own. Join us in our mission to transform lives, alleviate poverty for millions, and save countless lives through enhanced connectivity.Job SummaryAs a Principal Mechanical Engineer at Lynk, you will play a crucial role in the analysis, design, development, and enhancement of mechanical systems related to our satellite communications payloads, satellites, testbeds, and testing equipment. Candidates must possess prior experience in satellite design to qualify for this position. Key deliverables will include creating mechanical models of both space and ground systems using CAD software such as SolidWorks, along with performing thermal, structural, vibration, and finite element analyses to support critical system trades. Your responsibilities will also extend to integration and testing support for essential hardware systems, encompassing satellite mechanical, structural, and electrical subsystems. While the focus is on mechanical engineering, collaboration with the Electrical, RF, Software, and Systems teams will be essential.If you thrive on challenges, enjoy multi-faceted roles, and have a proven track record of innovative problem-solving, we eagerly await your application!

Company OverviewEdgesource Corporation has been at the forefront of innovative technology solutions for over 25 years, catering to clients including the Department of Defense (DOD), Department of Homeland Security (DHS), Department of State (DOS), the U.S. Intelligence Community, law enforcement agencies, and various federal, state, and commercial entities. Our mission ranges from delivering specialized technical support for the DOD Counter Unmanned Aerial Systems (CUAS) efforts to tackling pressing cybersecurity challenges as a prime contractor with the DHS Cybersecurity & Infrastructure Security Agency (CISA). Joining Edgesource means embracing an opportunity to engage in meaningful, interesting, and impactful work.Position OverviewWe are on the lookout for a highly skilled Senior Software Engineer to become an integral part of our Agile development team. You will play a key role in supporting mission-critical enterprise systems within a secure environment. This position demands a hands-on technical leader capable of designing, developing, and modernizing software solutions using .NET Core, while facilitating the transition of legacy systems to a cloud-first architecture.

About the Internship lynk is looking for a Mechanical Engineering Intern in Chantilly, VA. This role offers a chance to work closely with experienced engineers on real-world projects. Interns will put classroom learning into practice, take part in hands-on engineering work, and contribute to team efforts focused on developing new solutions.

Join a Dynamic Team and Make an Impact!In the fast-paced world of technology, it’s the people who truly make the difference. At AnaVation, we recognize that investing in talented individuals leads to extraordinary outcomes. We are committed to delivering exceptional value to our clients as well as fostering a vibrant and innovative workplace culture.AnaVation is looking for a highly skilled Senior Network Engineer to take charge of the design, installation, maintenance, and evaluation of our network and communications systems. This pivotal role involves gathering user network requirements, producing comprehensive technical documentation, and supporting a multi-enclave environment to ensure secure data access across our network infrastructure.Key Responsibilities• Design, install, maintain, and evaluate network and communications systems• Gather user network requirements using various methodologies• Create detailed technical documentation, system requirements documents, and security requirements• Troubleshoot and resolve network issues across various protocols, topologies, and hardware• Assist in network architecture design, feasibility studies, and cost evaluations• Enhance processes for deploying and maintaining network infrastructure• Collaborate both independently and as part of a team to improve network solutions• Design, deploy, test, certify, and patch network components including switches, firewalls, and load balancers• Address interoperability issues across all features, components, and application dependencies• Respond to and resolve critical network incidents within set timelines

At Accenture Federal Services, our foremost priority is to empower the US federal government in fortifying the nation and enhancing the quality of life for its citizens. Our dedicated team of over 13,000 professionals is committed to exploring the boundless possibilities of technology and innovation for clients in defense, national security, public safety, civilian, and military health sectors. Become a part of Accenture Federal Services, a technological arm of the global Accenture network. Acknowledged as one of Glassdoor's Top 100 Best Places to Work, we foster a collaborative and nurturing environment where you can truly belong. We empower our employees to grow, learn, and excel through hands-on experiences, certifications, industry training, and much more. Join us in driving meaningful, sustainable change that advances missions and government initiatives! Job DescriptionAs a Senior Infrastructure Engineer, you will manage and maintain the critical infrastructure that underpins our data center environment. You will oversee the operation and optimization of servers, networks, and storage systems to ensure exceptional performance and reliability. Your responsibilities will include configuring and managing Cisco switches and firewalls, as well as working with HPE and Dell servers to deliver robust and scalable solutions. You will also handle advanced storage systems, including Dell, HPE, and PureStorage Network Attached Storage, ensuring data integrity and accessibility. Moreover, you'll manage copper and fiber cabling to maintain efficient connectivity across the infrastructure and leverage your expertise in power and cooling capacity management to estimate and optimize resource utilization within the data center. Additionally, you will create detailed infrastructure diagrams using tools like Visio or DrawIO, which will aid in documenting server racks, physical connections, and network layouts for current and future planning needs.

Join the innovative team at XMSTART as an Operations Systems Engineer, where you'll play a crucial role in a dynamic space program located in Chantilly, VA. In this exciting position, you will have the opportunity to acquire and deploy next-generation space assets, including pioneering satellite constellations equipped with cutting-edge technology. This mission-driven role allows you to make a significant impact on our nation's capabilities while collaborating with a dedicated team focused on achieving mission success.We are seeking a candidate with a robust background in operations, particularly in satellite operations. You should possess exceptional problem-solving abilities, creativity, and a proactive approach, with a commitment to going above and beyond in a fast-paced NRO System Program Office environment.If you are passionate about shaping the future of space technology and thrive in a mission-oriented atmosphere, this team is the perfect fit for you! Please note that this position is 100% Onsite.

Cloud and Storage EngineerEmployment Type: Full-TimeDepartment: Information TechnologyJoin CGS Federal as a Cloud and Storage Engineer, where you will play a pivotal role in designing and executing comprehensive Storage Area Network (SAN) architectures for a significant EMC-based SAN infrastructure, supporting a major federal agency. The successful candidate will thrive in a dynamic environment and will be responsible for establishing standards and processes related to storage configuration, optimization, replication, and security.At CGS, we unite talented, innovative professionals to address the government’s most pressing challenges using advanced technology. We are looking for individuals passionate about contributing to government innovation, valuing teamwork, and anticipating the needs of others. Our supportive work environment fosters professional development through diverse learning opportunities.